# | Name of the Student | Year | Paper Title |
---|---|---|---|
1 | S.K.Deb, R.K.Kakoti, P.Kakoty and H.Doloi, | 2023 | Smart irrigation for sustainable rural development: a study of Nalbari Irrigation Circle”, Proceedings of 6th International |
2 | Manash Bhuyan and Anil Borah | 2023 | Ageing Kinetics of Al-4.28Cu-1.60Mg Alloy Micro-Alloyed with Titanium”, Journal of The Institution of Engineers (India): Series D, published online: 12 April, 2023 |
3 | Manash Bhuyan and Anil Borah | 2023 | Microstructure and Mechanical Properties Correlation of Al-4.28Cu-1.60 Mg Alloy Micro-Alloyed with Titanium”, Journal of Materials Engineering and Performance, © ASM International Published online 21 February, 2023 |
4 | Hrishikesh Bhattacharyya, Anil Borah, U. K. Nath, | 2023 | Effect of Partial Substitution of Cement by Steel Slag in Autoclave Aerated Concrete (AAC) Block” Paper ID: PID85, 4th International Conference on Recent Advancement of Mechanical Engineering (ICRAME) 2023, 03-05 |
5 | Deka Rupam, Das Kalyan Kumar | 2023 | Macro Flow Dynamic Study of Wind Around a Gable Roof Building with Openings”, International journal of Multidisciplinary Research, ISSN 2582-2160 DOI: http://doi.org/10.36948/ijfmr.2023 |
6 | Baruah Jitul, Bhargav Borah, Das Kalyan Kumar | 2023 | “Study on Improvement of air quality in Underground car parking area using jet fan”, I journal of Transport Engineering |
7 | Baruah Jitul, Himalay Sonowal, Das Kalyan Kumar | 2023 | Experimental and Numerical Study of smoke flow Dynamics in a scaled down model of an underground car parking area |
8 | Manash Hazarika | 2023 | An improved genetic algorithm for the machine-part cell formation problem, International Journal of System Assurance Engineering and Management 14 (1) 206-219, 2023 Springer India |
9 | Manash Hazarika | 2023 | “Sequential process machine cell formation with hybrid particle swarm optimization” International Journal on Interactive Design and Manufacturing (IJIDeM), Springer Paris pages 1-13 |
10 | Prasanta Kumar Choudhury, Deepjyoti Patowary and Jitumoni Kumar | 2023 | A Review on Hydrogen Fuel for a Cleaner Future”; 4th International Conference on Recent Advancement in Mechanical Engineering (ICRAME-2023); February 3-5, 2023; NITSilchar.[Book chapter by Springer (in press)] |
11 | Prasanta Kumar Choudhury and Marulina Kalita | 2023 | An Application of Multivariate Regression Analysis in Yield Optimisation of Biodiesel Synthesis from Used Sunflower Oil”. |
12 | Deepjyoti Patowary and Prasanta Kumar Choudhury | 2023 | \"Green Building for a Sustainable Future”; SOUVENIR- Assam Engineering College Alumni Association; Published on 25th |
13 | Monoj Baruah, and Kalyan Kalita, | 2023 | Effect of Longitudinal and Lateral Holes on the Performance of an Elliptical Pin Fin Heat Exchanger”, Transactions of the Indian National Academy of Engineering (8) 2023, 235-244 |
14 | Manash Hazarika, 2022 | 2022 | \"An improved genetic algorithm for the machine-part cell formation |
15 | Nabajit Dev Choudhury and Niharendu Saha | 2022 | A Preliminary Investigation of Physicochemical, Rheological and Tribological Properties of Bio-lubricant from Thevetia Peruviana Oil, Tribology in Industry, Vol. 44, No. 4 (2022) 641-651, DOI: 10.24874/ti.1342.07.22.10. |
16 | Baruah, M. and Borah, A | 2022 | “Impact behaviour and fractography of 6061 alloy with Traceaddition of Sn ”, Frattura ed Integrità Strutturale, 16(62), pp. 126–133. doi: 10.3221/IGFESIS.62.09. |
17 | Prasanta Kumar Choudhury, Niraj Kashyap & Biplab Das | 2022 | Application of TaguchiDEAR Method for Parametric Optimization of CI Engine with Waste Cooking Oil Biodiesel. |
18 | P K Choudhury, M Kalita. | 2022 | The Problem of Groundwater Contamination in India: Its impact and Remedies. Theme: Groundwater: Making the invisible visible. World Water Day 22nd March 2022. Technical Volume cum Souvenir. Organized by: The Institution of Engineers |
19 | B Chetia, P K Choudhury. | 2022 | Process Optimisation for CI Engine Characteristics with Waste Cooking Oil Biodiesel. ICRAME 2022: 3rd International Conference on Recent Advancements in Mechanical Engineering Mechanical Engineering Department, NIT Silchar, |
20 | Manash Hazarika | 2022 | \"An improved genetic algorithm for the machine-part cell formation problem\". Int. J. Syst. Assur. Eng. Manag, DOI: 10.1007/s13198-021-01615-9 |
21 | J Arumughan, M K Vijayakrishnan, K Palaniswamy, T Alam, T Kumaresan, S K P Angappamudaliar, S Sundaram. | 2022 | Electrochemical analysis of nano-electro fuels based on multi-walled carbon nanotubes and graphene nanoplatelets for vanadium redox flow batteries. Materials Letters 315 (2022) 131939 |
22 | Baruah, M. and Borah, A | 2022 | Impact behaviour and fractography of 6061 alloy with Trace addition of Sn”, Frattura ed Integrità Strutturale, 16(62), pp. 126–133. doi: 10.3221/IGFESIS.62.09. |
23 | Urbashi Bordoloi, Dudul Das, Devarshi Kashyap, Deepak Patwa, Plaban Bora, Harrison Hihu Muigai, Pankaj Kalita | 2022 | Synthesis and comparative analysis of biochar based form-stable phase |
24 | Rajiv Lochan Bikash Roy, Dr D K Mahanta, Dr. P K Mahanta | 2021 | “A Comparative Study of Rotary |
25 | Mridul Deka, Pradeep Kumar Mahanta, Nabajit Dev Choudhury | 2021 | “Effect of EGR on Performance |
26 | Nabajit Deb Choudhury, Niharendu Saha, Biswaranjan Phukan and Rupam Kataki | 2021 | \"Characterization and Evaluation of Energy properties of Pallets production Coir pith, |
27 | Bhuyan M., Borah A | 2021 | “Investigating the Effect of water Cooling on Hardness of 2XXX Series AlAlloy Micro Alloyed with 0.02 and 0.04 wt% of Titanium”, Materials Today: Proceeding, 2021, |
28 | Monoj Baruah, A. Borah | 2021 | “Effect of Solution Treatment on Ageing Behaviour of Al-Mg-Si-Sn |
29 | Monoj Baruah, A. Borah | 2021 | “On the enhancement of wear resistance of Al-Mg-Si alloy via microalloying Sn” Sådhanå (2021) P 46-129, Indian Academy of Sciences |
30 | Monoj Baruah, A. Borah | 2021 | \"Structure-property correlation of Al-Mg-Si alloys micro-alloyed |
31 | Chinmoy Jit Sarma, Bhaskor J Bora, Dilip K Bora and Bhaskar J Medhi | 2021 | Effect of compression |
32 | Mr. P K Choudhury, Mr. N Kashyap | 2021 | “Application of taguchi-dear method for parametric |
33 | Tiwari, A., Pankaj, P., Suman, S., Singh, P., Biswas, P., Pal, S., Rao | 2021 | A.G. Effect of plasma |
34 | Kutum R, Singh P., Saha A. | 2021 | Experimental Study on Recycled Polyethylene Terephthalate (PET) Bottle Fibre Reinforced Concrete. In: Kalamdhad A.S. (eds) IntegratedApproaches Towards Solid Waste Management. Springer, Cham. |
35 | Kutum R., Singh P., Saha A | 2021 | Comparative Study of Jute Fiber and PET Fiber-Reinforced Concrete. In: Bora P.K., Nandi S., Laskar S. (eds) Emerging Technologies for Smart Cities. Lecture Notes in Electrical Engineering, vol 765. Springer, Singapore. |
36 | . Marappana, M., Vijayakrishnan, MK., Palaniswamy, K., Manoharan, K., Kumaresan, T., Arumughan J | 2021 | Experimental investigation on serpentine, parallel and novel zig-zag flow fields for effective water removal and enhanced performance on 25 cm2 PEMFC Journal of Ceramic Processing Research February 2021 Pages 131-142 Volume 22 |
37 | Kutum R., Singh P., Saha A. | 2021 | Comparative Study of Jute Fiber and PET Fiber-Reinforced |
38 | Kutum R., Singh P., Saha A | 2021 | Experimental Study on Recycled Polyethylene |
39 | S S Mallick, S Neog, D K Mahanta and M Rafi | 2021 | A review on passive cooling techniques for lithium-ion battery thermal management system of electric vehicle, IOP Conf. Series: Materials Science and Engineering, 2021, 1145, 012046,doi:10.1088/1757-899X/1145/1/012046 |
40 | Bhuyan., M., Borah., A | 2021 | “Investigating the Effect of water Cooling on Hardness of 2XXX Series Al-Alloy Micro Alloyed with 0.02 and 0.04 wt% of Titanium”, Materials Today: Proceeding, 2021, Elsevier Publication, Vol. 43, Part 1, pp.689-693. |
41 | Baruah, M., Borah, A. | 2021 | On the enhancement of wear resistance of Al-Mg-Si alloy via microalloying Sn. Sådhanå 46, 129 (2021). https://doi.org/10.1007/s12046-021-01655-8 |
42 | . Baruah, M., Borah, A | 2021 | Structure–Property Correlation of Al–Mg–Si Alloys Micro-alloyed with Sn. Inter Metalcast (2021). https://doi.org/10.1007/s40962-021-00652-1 |
43 | Baruah M, Borah A. | 2021 | Effect of Solution Treatment on Ageing Behaviour of Al-Mg-Si-Sn Alloy. |
44 | Reeshab Pratim Upamanaya, Aditya Bishwakarma & Vishal Vivek Saikia With Sudip Kumar Deb | 2020 | Fabrication of carbon capture device using activated charcoal. National Conference for Students |
45 | Kabita Roy & B. J. Phukan With S.K.Deb | 2020 | Possibilities of condensate recovery from split air conditioner |
46 | Abhijit Chakraborty & Abhisek Bhowmik With Sudip Kumar Deb (2020) | 2020 | Applications of Systems |
47 | Sahul Muhique With Kalyan Kalita | 2020 | Numerical simulation of submarine hydrodynamics and flow |
48 | Rathish Borah, Pankaj Das & Bhargav Hazarika With Kalyan Kalita | 2020 | Design and fabrication of a mini farming cultivator. National Conference for Students “Advances in Mechanical Engineering”, AEC, Guwahati-781013. |
49 | Desringdi Maibangsa With Plabon Kakoti | 2020 | Development of an index for ranking of cement based on its quality characteristics. National Conference for Students “Advances in Mechanical Engineering”, AEC, Guwahati-781013. |
50 | Iqbal Mustaffa, Jamal Choudhury & Barun Bipllab Gogoi With PlabonKakoti | 2020 | Utilization of rain water for producing electricity using nominal cost set up. National Conference for Students “Advances in Mechanical Engineering”, AEC, Guwahati-781013. |
51 | Dhritiraj Lahkar, Nabajit Dev Choudhury With Niharendu Saha | 2020 | Experimental investigation of energy properties for Cucurbita Pepo Deoiled Cake and its blend with sawdust and Ipomoea Carnea as potential source of solid fuel. National Conference for Students “Advances in Mechanical Engineering”, AEC, Guwahati-781013. |
52 | Jishnu Goswami, Monikesh Kakoty & Rahul Pandey With Anil Borah | 2020 | Comparative Study of Arc Welding Using Solid and Tubular Electrodes. National Conference for Students “Advances in Mechanical Engineering”, AEC, Guwahati-781013. |
53 | Souvik Deb Roy, Dhiraj Rabha & Mahmoodul Hasan With Manjuri Hazarika | 2020 | Study and analysis of a |
54 | M. Baruah, J.M.Barman, U.N.Konwar & F.B.Kashyap With K. K. Das | 2020 | A computational investigation on performance of elliptical pin fin heat exchanger. National Conference for Students “Advances in Mechanical Engineering”, AEC, Guwahati-781013. |
55 | Animesh Borgohain & Kaustav Bharadwaz With Baharul Islam Barbhuyan | 2020 | Implementation of Energy Efficient Measures in a Typical Commercial Building in Assam. National Conference for Students “Advances in Mechanical Engineering”, AEC, Guwahati-781013. |
56 | Bidisha Chetia With Prasanta Kumar Choudhury | 2020 | Multi-objective optimization of engine performance with waste cooking oil (WCO) biodiesel using Taguchi-DEAR method- a case study. National Conference for Students “Advances in Mechanical Engineering”, AEC, Guwahati-781013. |
57 | Manash Bhuyan, Imran Hussain Ahmed, Bappi Chamua, Manas Jyoti Medok & Raju Ronghang WithMousumiGogoi | 2020 | Design and fabrication of a flood proof house to overcome the flood hazards in Assam, India. National Conference for Students “Advances in Mechanical Engineering”, AEC, Guwahati-781013. |
58 | Nikita Katharpi With Bashab Jyoti Phukan | 2020 | Computational fluid dynamics of analysis of air conditioning performance in room by using ansys fluent. National Conference for Students “Advances in Mechanical Engineering”, AEC, Guwahati-781013. |
59 | Kabita Roy With S.K.Deb & B.J.Phukan | 2020 | Possibilities of condensate recovery from split air conditioner in the climatic condition of Guwahati city and its utilization. National Conference for Students “Advances in Mechanical Engineering”, AEC, Guwahati-781013. |
60 | Hrishikesh Basumatary With Pradip Baishya | 2020 | Feasibility study for solid waste management on kamakhya temple and vicinity through plasma pyrolysis technology. National Conference for Students “Advances in Mechanical Engineering”, AEC, Guwahati-781013. |
61 | Himadri Sikhar Das With Manash Hazarika | 2020 | Study and optimization of machine cell formation for sequential problems. National Conference for Students “Advances in Mechanical Engineering”, AEC, Guwahati-781013. |
62 | Tanvir Alam, Juhita Das & Abhishek Roy With Jyothis Arumughan | 2020 | Review on feasibility of flow batteries in electric vehicles. National Conference for Students “Advances in Mechanical Engineering”, AEC, Guwahati-781013. |
63 | Raktim Prakash Karjee With Juan Chowdhury | 2020 | Retro fitting Shedding Mechanism in Power Loom. National Conference for Students “Advances in Mechanical Engineering”, AEC, Guwahati-781013. |
64 | R Kutum & P Singh With A Saha | 2020 | Experimental study on Recycled Polyethylene Terephthalate(PET) Bottles Fiber Reinforced Concrete. Proceeding of 3rd International Conference on Waste Management-Recycle 2020organized by IIT Guwahati, Feb 13-14, 2020 |
65 | R Kutum With P Singh & ASaha | 2020 | A Comparative Study on Jute-Fiber and Polymer-Fiber Reinforced Concrete. Proceeding of 1st International Conference on Emerging Global Trends in Engineering and Technology (EGRET-2020) held on 6-7 March,2020 organized by School of Technology, Assam Don Bosco University |
66 | R Kutum With P Singh & A. Saha | 2020 | Experimental Study on Fibers and without Fibers Reinforced Concrete. TEQIP III Sponsored National Conference for students on Advances in Mechanical Engineering held on 6th March, 2020 at Mechanical Engineering Dept., AEC |
67 | J Roy, M A Barbhuiya & P Boruah With A Saha | 2020 | Study of Temperature variation in LPG Refrigeration System. TEQIP III Sponsored National Conference for students on Advances in Mechanical Engineering held on 6th March, 2020 at Mechanical Engineering Dept., AEC |
68 | Anirudh Roy With Abhimanyu Kar | 2020 | Preparation of IC engine fuel using waste plastic (LDPE) chips. National Conference for Students “Advances in Mechanical Engineering”, AEC, Guwahati-781013. |
69 | Nayan Gogoi, Kaushik Baidya & Pulastya Sarmah With Subhransu Sekhar Mallick | 2020 | Design and fabrication of a small scale electric crop harvester. National Conference for Students “Advances in Mechanical Engineering”, AEC, Guwahati-781013. |
70 | Samiron Neog With Subhransu Sekhar Mallick | 2020 | A comparative simulation study of thermal characteristics of Li-ion battery cell. National Conference for Students “Advances in Mechanical Engineering”, AEC, Guwahati-781013. |
71 | Imran Hussain Ahmed, Bappi Chamua, Manas Jyoti Medok, Raju Ronghang & Mousumi Gogoi With Manash Bhuyan | 2020 | Design and fabrication of a flood proof house to overcome the flood hazards in Assam, India. National Conference for Students “Advances in Mechanical Engineering”, AEC, Guwahati-781013. |
Assam Engineering College, Jalukbari
Guwahati-781013, Assam, India
Email: medaecoffice@gmail.com
Designed and Developed By - COREXX